MAWC SWEENEY PLANT Lead Service Line Inventory
Overview
MAWC SWEENEY PLANT serves approximately 143,000 people in Pennsylvania. The utility draws water from surface sources.
As of now, no lead service line inventory data is publicly available through this utility's records that we could locate. This does not mean there are no lead service lines in the system—it means either an inventory has not been completed, completed data has not been made public, or the utility has not yet reported it to us.
What this means for you
Under federal law (the Lead and Copper Rule), water utilities must maintain an inventory of service lines and identify which ones contain lead. However, the timeline for completing these inventories is still underway, and reporting requirements vary.
The absence of public data doesn't indicate safety. It reflects where the utility stands in the inventory process.
How to find out if your line contains lead
Contact MAWC SWEENEY PLANT directly. Ask them:
- Does your system have a completed lead service line inventory?
- Is your address on a lead service line, or is the status unknown?
- What steps are they taking to identify and replace lead lines?
Your utility can often tell you immediately based on construction records, water meter location, and service line materials visible at your property.
If you're concerned about lead in your water
Testing your water is straightforward and inexpensive. A certified lab can tell you whether lead is present at your tap. The EPA recommends having your water tested if your home was built before 1986 or if you have reason to suspect lead exposure.
For health questions—especially if you have young children or are pregnant—contact your pediatrician or local health department. The CDC provides evidence-based guidance on lead exposure risks.
Next steps for residents
- Contact your utility at your next bill or via their website to ask about their lead service line inventory status.
- Request your service line status by address if an inventory exists.
- Have your water tested by a certified lab if you live in a home built before 1986 or have other risk factors.
- Ask about replacement programs if you're told you have a lead service line—many utilities now offer cost-sharing or free replacement under federal and state funding.
---
Key figures
| Total inventoried lines | 0 |
|---|---|
| BIL/IIJA funding received | — |
| Replacement plan status | Not reported |
| Utility's LCRR inventory | Not provided |
Frequently asked
How do I know if my house has a lead service line?
Contact your water utility and ask if your address is served by a lead line. You can also look where the service line enters your home—lead is dark gray, soft, and leaves a mark if you scratch it gently. Your utility often has construction records showing line material.
Is my water safe if I have a lead service line?
Lead enters water mainly when it sits in pipes, especially if your water is corrosive or pH is low. Flushing the tap for 30 seconds before drinking can reduce risk, but the only permanent fix is replacement. Ask your utility about their corrosion control practices.
How much does it cost to replace a lead service line?
Full replacement typically costs $1,000–$5,000 depending on depth and soil conditions. Many utilities now offer programs that cover partial or full costs. Contact your water system to ask about available grants or cost-sharing.
Can I get a water filter to remove lead?
NSF-certified filters labeled for lead removal can reduce lead in drinking water. However, filters require regular replacement and don't address lead in showers or other uses. Replacement of the service line is the permanent solution.