LONDON CITY PWS Lead Service Line Inventory
What you need to know
LONDON CITY PWS serves about 10,256 people in Ohio. The utility draws water from groundwater sources.
Lead service line inventory status: LONDON CITY PWS has not yet completed a public inventory of lead service lines in its service area. This means the utility is still in the process of identifying which homes are connected to the water main with lead pipes.
Why this matters
Lead service lines are the most common source of lead in drinking water. When water sits in a lead pipe overnight or over several hours, small amounts of lead can dissolve into it. Children under 6 and pregnant people are at highest risk from lead exposure.
Because LONDON CITY PWS has not finalized its inventory, you don't yet have access to a definitive list showing whether your specific address has a lead service line. However, you can take steps now to reduce your risk.
What to do right now
Contact your water utility directly. Call or email LONDON CITY PWS and ask:
- Does my address have a lead service line?
- Do you have any findings from sampling my water for lead?
- When will the full inventory be available to the public?
Get your water tested. You can request a free or low-cost lead test through your local health department, or purchase a certified test kit. Testing is the only way to know your water's actual lead level.
Use these interim strategies while you wait for answers:
- Run cold water from the tap for 30 seconds before drinking or cooking (if the water has been sitting for more than 6 hours).
- Use cold water for drinking and cooking—hot water dissolves lead faster.
- Consider a point-of-use water filter certified to remove lead (look for NSF/ANSI Standard 53).
If you have young children or are pregnant, talk to your pediatrician or doctor about lead exposure concerns. They can discuss testing and next steps specific to your situation.
Next steps for residents
- Contact LONDON CITY PWS to ask about your specific address and the timeline for their inventory
- Request a free or low-cost lead test from your local health department
- Apply interim water safety practices (flushing, using cold water) while you await more information
- Share findings with family members and neighbors—many may have the same questions
---
Key figures
| Total inventoried lines | 0 |
|---|---|
| BIL/IIJA funding received | — |
| Replacement plan status | Not reported |
| Utility's LCRR inventory | Not provided |
Frequently asked
How do I know if my house has a lead service line?
The only certain way is to contact your water utility and ask about your specific address. You can also look at your water bill or service records, which sometimes note the pipe material. A water test will show if lead is present in your water, though it doesn't confirm the pipe itself is lead.
Is lead in water dangerous?
Lead is a toxic metal that can harm the brain and nervous system, especially in children under 6. There is no safe level of lead in drinking water. Even low-level exposure over time can cause health problems. For detailed health information, contact your pediatrician or the CDC.
What should I do if I'm worried about lead in my tap water?
Get your water tested first—testing is free or low-cost through most local health departments. In the meantime, flush your tap for 30 seconds before drinking, use cold water for consumption, and consider a certified lead-removal filter. Contact your water utility to ask about their lead service line inventory.
When will LONDON CITY PWS finish its lead service line inventory?
Contact the utility directly for an update on their timeline. Federal law requires all water systems to complete and maintain an inventory, but completion dates vary. Asking them directly is the fastest way to get an answer for your area.