SOUTHWEST REGIONAL WATER DISTRICT Lead Service Line Inventory

About this water system

SOUTHWEST REGIONAL WATER DISTRICT serves 42,856 people in Ohio. The utility draws its water from groundwater sources.

Lead service line inventory status

As of now, SOUTHWEST REGIONAL WATER DISTRICT has not completed a public lead service line (LSL) inventory. This means the utility has not yet published a count of how many lead pipes connect homes to the water main in its service area.

Under the federal Lead and Copper Rule, all water systems must identify and inventory lead service lines. Utilities typically complete this work by reviewing historical records, inspecting the water main connections visible at the street, and sometimes sampling water at homes. The process can take months or years depending on system size and available funding.

What this means for you: Without a published inventory, you won't find a definitive list of affected addresses online. However, your home may still have a lead service line. The only way to know for sure is to:

1. Contact your water utility directly. Ask whether your specific address has a known lead service line, or whether your connection material is documented. 2. Check your water bill or utility website. Some systems post inventory data or maps as they complete them. 3. Request a water test. Even if your service line is not lead, corrosion or other issues can release lead from internal plumbing. A certified lab test of your tap water provides a direct answer about what you're actually drinking.

Protecting your household

If you're concerned about lead in your water, the CDC recommends:

• Running water for 30 seconds before using it for drinking or cooking (flushing the line).
• Using cold tap water for drinking and cooking; hot water dissolves lead more readily.
• Testing your water through a certified lab (contact your utility or your state health department for recommendations).
• Installing a point-of-use filter certified for lead removal if testing shows contamination.

If you have young children or are pregnant, consult your pediatrician or healthcare provider about lead exposure risks and testing options.

Next steps for residents

• Contact SOUTHWEST REGIONAL WATER DISTRICT and ask about lead service line inventory status and whether your address is documented.
• Request your service line material. The utility may have records even if a public inventory is not yet published.
• Test your water. A simple lab test tells you whether lead is present in your tap water right now.
• Check your utility's website for updates on the LSL inventory project and any lead reduction work planned.

---

```json [ { "q": "How do I know if my house has a lead service line?", "a": "Contact SOUTHWEST REGIONAL WATER DISTRICT directly with your address and ask about your service line material. You can also look at the water meter in your basement or yard—lead is soft, gray, and dull. A certified water test will also tell you if lead is entering your home from any source." }, { "q": "Is the water safe to drink?", "a": "The only way to know is to test it. Lead service lines don't always release lead into water, and lead can come from other sources too. A lab test gives you a real answer for your home." }, { "q": "When will the water system finish its lead inventory?", "a": "SOUTHWEST REGIONAL WATER DISTRICT has not yet published a completion timeline. Contact the utility to ask about their inventory schedule and any federal funding they've received to speed up the work." }, { "q": "What should I do if my water tests high for lead?", "a": "Run your tap water for 30 seconds before use, use cold water for drinking and cooking, and consider installing a point-of-use filter certified for lead. Contact your pediatrician if you have young children, and ask your utility about lead service line replacement programs in your area." } ]