CONNESTEE FALLS Lead Service Line Inventory
About This Water System
CONNESTEE FALLS serves approximately 3,532 residents in North Carolina through groundwater sources. Like all US water systems, it is required by federal law to maintain an inventory of lead service lines—the pipes that connect the water main to individual homes.
Current Inventory Status
As of the latest available data, CONNESTEE FALLS has not yet completed a public lead service line inventory. This does not mean your home has or doesn't have a lead service line; it means the utility has not yet published counts of how many lines exist in the system.
The Safe Drinking Water Act requires all water systems to identify lead service lines and make that information available to customers by October 2024. If CONNESTEE FALLS has not published its inventory yet, contact the utility directly to ask about their timeline and what they've found so far.
What You Can Do Now
Check your own home. Lead service lines are typically found in homes built before the 1970s, though some exist in newer homes. You can often see the service line where it enters your home's foundation or where the water meter is located. Lead pipes are dull gray, soft enough to scratch with a coin, and often have a swollen middle section. A plumber or your water utility can confirm what material your service line is made of.
Get your water tested. Even if you have a lead service line, you can reduce exposure by having your water tested and using point-of-use filters (like faucet-mounted or pitcher filters certified for lead removal). The EPA recommends flushing your tap for 30 seconds to 2 minutes before drinking if your water has been sitting for several hours.
Stay informed. Once CONNESTEE FALLS publishes its lead service line inventory, you'll be able to see system-wide data. If your home is flagged as having a lead service line, the utility should provide guidance on replacement options.
Next Steps for Residents
- Contact CONNESTEE FALLS water utility to ask about the status of their lead service line inventory and whether your home's service line has been identified.
- Have your water tested through a certified lab (your utility can recommend one) to check for lead levels.
- Inspect your service line where it enters your home, or ask a plumber to identify what material it's made from.
- Check the EPA's lead resources at epa.gov for filters, testing, and health information.
Key figures
| Total inventoried lines | 0 |
|---|---|
| BIL/IIJA funding received | — |
| Replacement plan status | Not reported |
| Utility's LCRR inventory | Not provided |
Frequently asked
How do I know if I have a lead service line?
Lead pipes are dull gray, soft enough to scratch with a coin, and often bulge in the middle. You can inspect where the line enters your home's foundation, or ask a plumber to confirm. Your water utility may also have this information if they've begun their inventory.
Is my water safe to drink if I have a lead service line?
It depends on your water's pH, corrosion control, and how old the line is. The only way to know is to test your water. A certified lab can measure lead levels; contact your water utility for testing recommendations.
What should I do if my water tests high for lead?
Use a filter certified for lead removal (NSF/ANSI 53 standard), flush your tap before drinking, and consider having lead service lines replaced. Contact your water utility about replacement programs and financial assistance.
When will CONNESTEE FALLS publish its lead service line inventory?
Federal law requires utilities to publish their inventories by October 2024. Contact CONNESTEE FALLS directly to ask about their timeline and what's been discovered so far.