CULKIN WATER DIST Lead Service Line Inventory
Culkin Water District serves about 11,730 people in Mississippi. This page tells you what's known about lead service lines in their system and how to find out if you have one.
What is a lead service line?
A lead service line is the pipe that connects your home to the water main under the street. If your home was built before 1986, there's a higher chance your service line contains lead. Lead can leach into drinking water, especially in homes with corrosive water or when water sits in pipes overnight.
What does Culkin Water District know about lead service lines?
Culkin Water District has not yet completed a full inventory of lead service lines in their system. As of now, 0 service lines have been inventoried. This doesn't mean there are no lead service lines—it means the district hasn't finished documenting which homes have them.
The district is required by federal law to create this inventory. Without a complete list, both the utility and residents don't have a clear picture of where lead pipes exist.
What's being done?
Culkin Water District should be working toward:
- Completing a service line inventory
- Creating a plan to replace lead service lines over time
- Sending notices to customers whose homes may have lead pipes
If you haven't heard from the district about this, you can contact them directly to ask about their timeline.
What can you do right now?
Even without knowing if you have a lead service line, you can reduce lead exposure:
- Run cold water first. Before drinking or cooking, flush your tap for 30 seconds to clear stagnant water in the pipes.
- Don't boil water to remove lead. Boiling concentrates lead rather than removing it.
- Use a filter. NSF-certified filters can reduce lead if installed correctly on your kitchen tap.
- Test your water. Contact your local health department or Culkin Water District for a free or low-cost test kit.
If you have young children or are pregnant, talk to your pediatrician or doctor about lead exposure—they can advise on whether additional testing is needed.
Next steps for residents
- Contact Culkin Water District to ask about the status of their lead service line inventory and replacement plan.
- Request a water test through the district or your local health department.
- Flush your tap before drinking or cooking with cold water.
- Check if your home qualifies for replacement assistance once the district launches a replacement program.
Key figures
| Total inventoried lines | 0 |
|---|---|
| BIL/IIJA funding received | — |
| Replacement plan status | Not reported |
| Utility's LCRR inventory | Not provided |
Frequently asked
How do I know if I have a lead service line?
Culkin Water District is still inventorying service lines, so they may not have that information yet. You can contact them directly, or have a licensed plumber inspect the line where it enters your home. Lead pipes are soft, dull gray, and can be scratched with a coin.
Is the water from Culkin Water District safe to drink?
Culkin Water District regularly tests drinking water for safety. The risk from lead comes from the pipes in your home or the connection to the street, not the water treatment itself. You can request a water test to check for lead at your tap.
When will Culkin Water District replace lead service lines?
The district has not yet published a replacement plan. Contact them to ask about their timeline and whether funding has been approved to begin replacements.
Can I get my lead service line replaced for free?
Federal and state funds are becoming available for lead line replacement, but programs vary by utility. Contact Culkin Water District to ask about assistance programs or any upcoming replacement initiative.