FALLS WATER COMPANY INC Lead Service Line Inventory
FALLS WATER COMPANY INC serves about 22,650 people in Idaho. Like all US water systems, it is required to maintain an inventory of lead service lines (LSLs)—the pipes that connect the water main to homes.
What we know about lead service lines in your area
As of now, FALLS WATER COMPANY INC has not published a publicly available lead service line inventory. This means either the inventory is still being compiled, or it has not yet been made accessible online.
This is normal. Many smaller water systems are still working to complete and document their lead service line counts. The Safe Drinking Water Act requires all systems to identify and eventually replace lead service lines, but the timeline varies.
What you can do right now
Your water system is required by federal law to provide you with information about lead service lines when you ask. Contact FALLS WATER COMPANY INC directly to:
- Ask whether your property has a lead service line
- Request a copy of their lead inventory (even if it's not online yet)
- Find out if any replacement programs are available
- Learn about testing options for your water
Even if your system says it has no known lead service lines, you can still request a water test if you're concerned. Testing is inexpensive and gives you concrete data about your specific home.
About lead and your health
Lead can leach into drinking water through corroded pipes and fixtures. Exposure to lead is a health concern, especially for young children and pregnant people. If you have health concerns, contact your pediatrician or your state health department.
The CDC has detailed guidance on lead in drinking water and how to reduce exposure at home.
Next steps for residents
- Contact your water system at FALLS WATER COMPANY INC to ask about lead service lines on your property
- Request their lead inventory or replacement plan status, even if you don't find it online
- Test your water for lead if you're concerned—your utility or local health department can recommend a certified lab
- Use a filter certified for lead removal (NSF/ANSI 53) while you investigate further
Key figures
| Total inventoried lines | 0 |
|---|---|
| BIL/IIJA funding received | — |
| Replacement plan status | Not reported |
| Utility's LCRR inventory | Not provided |
Frequently asked
How do I know if I have a lead service line?
Contact your water utility directly—they have records of which homes are served by lead pipes. You can also look at the water meter or pipe entering your home; lead is soft and gray. A magnet won't stick to lead. Your utility can tell you for certain.
Is lead in tap water dangerous?
Lead can be harmful, especially to young children and pregnant people. The EPA sets limits on lead in drinking water, but the CDC recommends reducing exposure as much as possible. Talk to your doctor or pediatrician if you have health concerns.
Can I remove lead from my water myself?
Yes, you can install a water filter certified for lead removal (look for NSF/ANSI 53 certification). However, the best long-term solution is replacing the lead service line. Ask your utility about replacement programs or financial assistance.
How much does it cost to replace a lead service line?
Replacement costs vary widely but typically range from $3,000 to $25,000 depending on the depth of the pipe and local conditions. Ask your water utility about rebate programs, grants, or low-interest loans that may be available.