JACKSONVILLE WATERWORKS Lead Service Line Inventory
Jacksonville Waterworks serves approximately 32,875 people in Arkansas. The utility draws its water from surface sources.
What you need to know
As of now, Jacksonville Waterworks has not yet completed a full inventory of lead service lines in its system. This is not unusual—many smaller utilities across the US are still in the early stages of mapping their pipes. An inventory takes time: crews must physically inspect underground lines, check historical records, and verify whether pipes contain lead.
Without a completed inventory, the utility and residents don't have a clear count of how many lead service lines exist in the system. That said, lead service lines are typically found in homes built before the 1980s, and their presence depends heavily on local installation practices and soil conditions.
Why this matters
Lead can leach into drinking water from corroded service lines—the pipes that connect your home to the main water line in the street. Even low levels of lead exposure can affect children's development, and there's no safe threshold. If you're concerned about lead in your water, testing is straightforward and inexpensive.
What to do now
Contact Jacksonville Waterworks directly to ask about:
- Whether your street or neighborhood has a history of lead service lines
- Whether your home's service line has been tested or documented
- Their timeline for completing a full inventory
- Free or low-cost water testing options
The utility's water quality report (called a Consumer Confidence Report) is published annually and may contain additional details about lead findings in the distribution system.
If you have young children or are pregnant, consider having your water tested regardless of what the utility says. A simple test costs $10–$25 at most labs.
Next steps for residents
- Contact Jacksonville Waterworks to learn about your specific property and their inventory progress
- Request a free or low-cost lead test kit if available through your county health department or state environmental agency
- If your water tests high for lead, ask the utility about service line replacement programs or temporary measures (like flushing lines before use)
- Review the utility's most recent Consumer Confidence Report for system-wide water quality data
Key figures
| Total inventoried lines | 0 |
|---|---|
| BIL/IIJA funding received | — |
| Replacement plan status | Not reported |
| Utility's LCRR inventory | Not provided |
Frequently asked
Does Jacksonville Waterworks have lead in the water?
Jacksonville Waterworks has not yet completed a full inventory of lead service lines, so a total count is not available. Lead presence depends on whether homes have lead service lines connecting them to the main water line. Contact the utility to learn if your area or home is known to have lead pipes.
How do I know if my house has a lead service line?
The most reliable way is to contact Jacksonville Waterworks and ask about your address—they may have records. You can also dig up a small section of the pipe near your home's foundation and check the color and markings, but professional testing is more accurate. A water test will also tell you if lead is present in your tap water.
Is it safe to drink tap water from Jacksonville Waterworks?
Jacksonville Waterworks treats and tests water to meet federal safety standards. However, if your home has a lead service line or old internal plumbing, lead can leach into your water. A simple water test will tell you if lead is present in your tap water specifically.
Will Jacksonville Waterworks replace my lead service line?
That depends on the utility's replacement program and funding. Since Jacksonville Waterworks is still completing its inventory, replacement programs may not be fully in place yet. Contact the utility directly to ask about replacement options, costs, and any grants or assistance available.